Outdoor & Garden Taps in Edinburgh
Get a Practical Outside Water Point for Gardening, Cleaning and Everyday Use.
Haggart Plumbers fit and repair outdoor and garden taps across Edinburgh, from adding a new garden tap to repairing or replacing one that leaks or has seized.
Our experienced plumbers run the supply, fit the tap and protect it for outdoor use, giving you a reliable outside tap ready for the garden, the car or a jet wash.
Gas Safe Registered. Fully Guaranteed.
-
Trading since 1903
More than a century of plumbing and heating work in the same city.
-
Gas Safe registered
Registration No. 936063. Every engineer carries a Gas Safe ID card to the door.
-
Vaillant Advanced Installer
Accredited to install and register Vaillant boilers, with the extended warranty that brings.
-
No call-out fee
We assess the job and explain the options before any work starts.
Complete Outdoor & Garden Taps Services
Fitting an outside tap requires more than just drilling a hole in the wall. We ensure every installation meets water regulations, specifically the byelaw backflow requirement. This means fitting a double check valve to prevent contaminated garden water from siphoning back into your main drinking supply. In Edinburgh tenements, we often navigate thick stone walls and shared supply lines, ensuring the new pipework is properly insulated against winter freezes. We secure the tap backplate firmly to the masonry so it withstands the daily tugging of heavy garden hoses.
You should call us when you need a new installation or when an existing tap starts showing signs of wear. A dripping hose-union bib tap or a seized valve wastes water and risks ice damage during cold weather. We assess your current setup, identify the best connection point on your internal pipework, and complete the installation or repair with minimal disruption to your home.
A burst or frozen outdoor pipe in winter is handled as an emergency call-out.
Gas Safe Registered. Vaillant Advanced Installer.
Haggart Plumbers is Gas Safe Registered, No. 936063, and a Vaillant Advanced Installer. Our engineers carry their Gas Safe ID cards to every job and work to current UK gas safety standards.
What Outdoor & Garden Tap Work Covers
-
Outdoor and garden tap installation
We carry out an outdoor-tap site survey to assess the proposed position, identify a suitable cold-mains branch connection and plan a secure route through the wall. We then fit the tap, provide an accessible means of isolation where practical and test the installation under normal pressure.
-
Brass hose-union bib taps
A brass hose-union bib tap provides a straightforward water point with a threaded outlet for compatible hose connectors. We commonly fit these to a solid tap backplate so the fitting does not move when someone attaches or removes a hose.
-
Lockable outdoor taps
A lockable tap helps control water use in front gardens, communal areas and other accessible positions. We check how you need to use the tap before selecting a model, as locking mechanisms and removable operating heads differ between fittings.
-
Frost-resistant taps and sillcocks
We can recommend a frost-resistant outdoor tap or frost-proof sillcock where the wall and internal pipe route make one suitable. Correct positioning matters. We check the wall depth, internal connection and drainage arrangement rather than treating the fitting as a direct replacement for every standard tap. We lag exposed pipe with closed-cell, UV-resistant insulation.
-
Outdoor mixer taps
An outdoor mixer tap supplies blended water for tasks where cold water alone is unsuitable. We assess both supplies, safe positioning and isolation before installation. This arrangement needs more pipework and planning than a standard cold-water garden tap.
-
Wall-mounted tap kits and protective fittings
We fit wall-mounted tap kits with suitable backplates and secure connections. Depending on the installation, we may specify a double check valve, vacuum breaker or hose-union tap with an integral check valve. We select the arrangement after inspecting the existing supply.
- Established 1903
- Gas Safe Registered No. 936063
- Vaillant Advanced Installer
- No call-out fee
- Free quotes
- Guaranteed workmanship
Common Outdoor Tap Problems We Solve
-
My outside tap keeps dripping
A dripping outside tap may have a worn washer, damaged internal part or seating problem. We isolate the supply, examine the tap and decide whether a repair offers a sound result. If corrosion or damage makes repair impractical, we can replace the fitting and test the connection.
-
My outside tap has frozen or burst
Frozen water can damage the tap body, wall connection or nearby supply pipe. We commonly find that the visible split does not show the full extent of the problem until the supply is carefully restored. We inspect the fitting, repair or replace damaged components and advise on isolation during cold weather.
-
There is no water coming from my garden tap
No flow can result from a closed isolation valve, internal blockage, failed tap mechanism or a problem with the local connection. We work through those points in order rather than replacing the tap immediately. We also check whether restricted flow only appears when a hose or connector is attached.
-
The tap moves or leaks where it meets the wall
An outdoor tap should not twist against its pipework when you connect a hose. Movement often points to a loose backplate, poor wall fixing or strain on the connection behind it. We remove loose fittings where necessary, inspect the connection and secure the tap to an appropriate mounting point.
Recent Projects Across Edinburgh
Trusted in Edinburgh. Their Words.
-
Dave Law, EdinburghPlumber (Joe) sorted the leak under the kitchen sink very quickly. I am glad I contacted Haggart Plumbers Ltd for this problem.
-
Fred Jacobsberg, EdinburghMy wife contacted Haggart (previously unknown to us) to assist with a minor plumbing problem which had necessitated turning off the mains water supply. They said that they could come either that day or the next…
-
Hazel Musson, EdinburghQuick and efficient. Arrived promptly at 8.15, and completed the work (replacing 6 radiators) by late morning. They tidied up thoroughly, leaving no sign of their presence other, obviously, than the new radiators.
How We Handle Your Outdoor & Garden Tap Work
-
1. Assess the position and water supply
After you contact us, we discuss how you plan to use the tap and inspect the proposed or existing position. We check the internal supply, isolation arrangements, wall construction and access. For Edinburgh tenements and shared gardens, we also confirm that the pipe route and tap position suit the building layout.
-
2. Explain the fitting and scope
We recommend a tap and connection arrangement based on the inspection. That may include a hose-union bib tap, lockable fitting, frost-resistant model, mixer tap or protective valve. You receive a clear explanation of the work and a quote for the job before we proceed.
-
3. Complete and coordinate the work
Your single point of contact manages the agreed work. We isolate the water, prepare the pipe route, fit the backplate and tap, and make the required connections. We protect the immediate work area and avoid unnecessary disturbance to the surrounding wall.
-
4. Test the tap and explain aftercare
We restore the supply and check joints, flow, isolation and operation. We show you how to turn off the local supply where an isolation valve is available and explain sensible cold-weather care. We leave the tap ready for use and answer any questions before completion.
Outdoor & Garden Taps Questions
-
We quote each installation by the job because access, wall construction, pipe distance and the chosen tap all affect the work. A nearby cold-water supply usually makes the installation more straightforward. Mixer taps, difficult routes and specialist fittings need a separate assessment. We provide a quote before starting.
-
We recommend using a plumber because the work involves connecting to the water supply, providing suitable isolation, securing the fitting and checking for leaks. We also consider backflow protection and the correct pipe route. A poorly supported connection can leak inside the wall or move during normal hose use.
-
An outside tap is useful if you regularly water plants, clean garden equipment, wash outdoor surfaces or fill containers. We help you choose a position that you can reach easily without trailing a hose through the house. The value depends on how often you need outdoor water.
-
No. We isolate the relevant water supply before removing an outside tap. Opening a pressurised connection can release water quickly and cause avoidable damage. If you cannot find or operate the isolation valve, we can identify the correct shut-off arrangement before replacing the tap.
-
A sound, accessible fitting can be straightforward to replace, but seized threads, loose backplates and damaged wall connections make the job more involved. We check what sits behind the tap before applying force. This reduces the risk of twisting or breaking concealed pipework.
-
Often, yes, but the building layout determines what is practical. We inspect the available internal supply, wall thickness, proposed route and access to the outside area. In Edinburgh tenements, communal gardens and shared walls may affect the position, so we confirm the installation plan before work begins.
-
We can assess a communal-garden water point and recommend a suitable arrangement. We often consider controlled access, a lockable tap and a position that does not obstruct shared routes. The property owner or customer must confirm any required permission for work to shared parts of the building.
-
Haggart Plumbers operates from 7am to 7pm, seven days a week. Availability depends on existing bookings and the type of work required. When you contact us on 0131 447 2656, we will discuss the fault or proposed installation and offer the next suitable appointment.
Working in Edinburgh
Edinburgh
EH10 6AD
- Monday to Friday
- 07:00 to 19:00
- Saturday
- 07:00 to 19:00
- Sunday
- 07:00 to 19:00